Chimney Sweep & Repair in Dallas, TX
Dallas Chimney Sweep Co sweeps, inspects and repairs chimneys and fireplaces for homes in Dallas and nearby cities. A sweep for one standard flue typically runs about $150–$400 (estimate, confirmed on the phone). Insured contractors, warranty available, and same-day service when available. Open 6 AM-8 PM, 7 days a week. Call [PHONE TBD].
Open 6 AM-8 PM, 7 days a week · Insured contractors · Warranty available · Same-day service available
Our services
- Chimney sweep and cleaning: soot and creosote removal from the flue, smoke chamber and firebox.
- Chimney inspection: Level 1 visual and Level 2 camera inspections.
- Chimney repair: crowns, masonry, tuckpointing and flashing.
- Chimney leak repair and waterproofing: stop water from getting in after storms.
- Chimney caps and fireplace repair: caps, chase covers, dampers and gas fireplaces.
What happens when a chimney is neglected
Every wood fire leaves creosote on the inside of the flue. It’s flammable, and as it builds up it raises the risk of a chimney fire. Nests and debris can block the flue, pushing smoke and carbon monoxide back into the house.
Weather matters too. Dallas gets hail, high wind and heavy spring rain. Cracked crowns, loose flashing and missing caps let water into the chimney, where it damages masonry, rusts dampers and can leak into ceilings and walls.
What a visit includes
- Call: we ask about your fireplace, how often you use it and any concerns, and give a typical price range.
- Protect: the contractor covers the hearth and nearby floors.
- Sweep and inspect: brushes and a vacuum system clean the flue while the contractor checks visible components.
- Report: you get a plain-English explanation of what was found, with photos where possible.
How our quotes work
We give you a typical range on the phone and confirm your price before work begins. If the contractor finds a repair need, you get an explanation and a separate quote. Nothing extra is done without your OK.
Before-and-after photos
Real photos from Dallas-area jobs will appear here as jobs are completed. We don’t use stock photos as examples of our work.
Signs your chimney needs attention
- A strong, smoky or campfire smell in the house, especially in humid weather
- Smoke drifting into the room instead of going up the flue
- Black, flaky deposits falling into the firebox
- Fires that are hard to start or keep burning
- Scratching or chirping sounds inside the chimney
- Water stains on the ceiling or wall near the fireplace
- Crumbling mortar, loose bricks or white staining on the outside
- A rusty damper or firebox
If you notice any of these, hold off on using the fireplace and call us. We’ll explain what’s likely going on and what a visit costs.
How to prepare for a sweep
- Don’t use the fireplace for at least 24 hours before the visit so ashes are cool.
- Clear a path from the door to the fireplace and move furniture a few feet back.
- Keep pets in another room.
- Let us know about roof access issues, steep pitches or a locked gate.
- Tell us about any problems you’ve noticed, such as smells, smoke or leaks.
A standard sweep usually takes one to two hours. We give you an arrival window when you book.
Wood-burning vs. gas fireplaces
Wood-burning fireplaces create creosote, so they need regular sweeping in addition to a yearly inspection. Gas fireplaces don’t create creosote, but they still need a yearly check: vents can be blocked by nests or debris, and burners, logs and connections should be looked at to make sure the fireplace runs and vents properly.
Not sure which you need? Call and describe your fireplace. See fireplace repair for gas fireplace work.
What affects the cost
- Number of flues. Each flue is swept separately.
- Creosote level. Heavy or glazed creosote takes longer and needs special tools.
- Roof access. Steep or high roofs take more time and equipment.
- Inspection level. A Level 2 camera inspection costs more than a visual check.
A sweep for one standard flue typically runs about $150–$400 (estimate, confirmed on the phone). Inspection ranges are on our chimney inspection page.
Safe fireplace habits
- Burn dry, seasoned hardwood; avoid green wood, trash and cardboard
- Keep the damper fully open while a fire burns
- Use a screen or glass doors
- Never leave a fire unattended, and let ashes cool fully before removing them
- Keep working smoke and carbon monoxide alarms in the home
Chimney care through the Dallas year
- Spring: after the burning season ends, a sweep removes creosote before humid summer air turns it smelly. Storm season begins, so watch for leaks.
- Summer: schedules are most open. A good time for inspections, caps and masonry repairs.
- Fall: the busiest season. Book early so the chimney is ready for the first cold front.
- Winter: fireplace season. Burn seasoned wood and call if you notice smoke in the room or a strong smell.
Our services in more detail
A sweep removes creosote and soot. An inspection tells you whether the chimney is in safe condition, with Level 1 and Level 2 options. Repairs address crowns, mortar, bricks and flashing. Leak repair and waterproofing find and fix the entry point and protect porous masonry. Caps and fireplace repair keep animals and rain out and get dampers and gas fireplaces working.
Most homeowners start with a sweep and inspection. That visit tells you, and us, whether anything else is needed.
How we work
- You get a typical price range on the phone, and your price is confirmed before any work begins.
- Nothing extra is done without your OK. If the technician finds something else, you get an explanation and a separate quote.
- We only show real photos of real jobs.
- We tell you when a service isn’t needed yet.
- Insured contractors, warranty available, and same-day service when the schedule allows.
What to have ready when you call
A few details help us give you an accurate range and send the right technician:
- Your city and general area
- Wood-burning or gas fireplace
- Roughly when it was last swept or inspected
- One-story or two-story home, and roof type if you know it
- Anything you’ve noticed: smells, smoke, leaks, sounds or visible damage
How to choose a chimney company
A good company should be easy to reach, clear about price and honest about what you actually need. Before you book anyone, check that they:
- Give you a realistic price range before the visit, not just a teaser price
- Confirm the price before work begins
- Explain what’s included and what costs extra
- Send insured contractors
- Offer a warranty and explain it
- Show real photos of your job, not stock images
Ask these questions on the phone. Our contractors are insured, a warranty is available, and your price is confirmed before work begins.
Neighborhoods and cities
We work across Dallas, from Lakewood and Lake Highlands to Preston Hollow, plus Plano, Richardson, Garland and other nearby cities. See all service areas, read our FAQ or contact us.
Frequently Asked Questions
How often should a chimney be swept?
Wood-burning chimneys should be inspected once a year and swept whenever creosote builds up, which for regular users is usually yearly. Occasional users may need a sweep less often, but the yearly inspection still matters. Book a chimney sweep before your first fire of the season.
How much does a chimney sweep cost in Dallas?
A chimney sweep for one standard flue in the Dallas area has a typical range of about $150–$400. Heavy creosote, extra flues or difficult roof access cost more. That range is an estimate; your exact price is confirmed on the phone before work begins.
What is the difference between a chimney sweep and a chimney inspection?
A sweep cleans soot and creosote out of the flue and firebox. An inspection checks the chimney’s condition, from the crown and liner to the damper and smoke chamber. Many visits combine both: a sweep plus a basic visual inspection. See chimney inspection.
Does a gas fireplace need cleaning?
Yes, though less often than a wood fireplace. Gas fireplaces don’t create creosote, but vents can be blocked by nests or debris, and logs, burners and the venting still need a yearly check to make sure everything works and vents safely.
Why is my chimney leaking when it rains?
The most common causes are a cracked crown, failed flashing where the chimney meets the roof, a missing cap, or porous brick and mortar. Dallas spring storms with wind-driven rain expose these weak spots. See chimney leak repair.
How long does a chimney sweep take and is it messy?
A standard sweep usually takes one to two hours. It shouldn’t be messy: the contractor covers the hearth area and uses a vacuum system to contain soot while brushing the flue.
When is the best time of year to sweep a chimney in Dallas?
Late spring through early fall is ideal. Schedules are more open, and the chimney is ready before the first cold snap. Fall and early winter are the busiest times, when everyone wants a fire at once.
Do I need an inspection when buying a home with a fireplace?
It’s strongly recommended. The NFPA 211 standard calls for a Level 2 inspection when a property changes hands, because a general home inspection often doesn’t look inside the flue. A camera inspection can reveal liner cracks or damage before you close. See chimney inspection.
Get your fireplace ready
Call [PHONE TBD] for a clear price range and the next open time. Open 6 AM-8 PM, 7 days a week.
Open 6 AM-8 PM, 7 days a week · Insured contractors · Warranty available · Same-day service available